background image

The following safety instructions are for correct and safe use of the ellipticals and should be followed for your safety and to prevent accident. 

There are 

3 types of safety marks PROBIHITION, WARNING, 

and 

CAUTION, 

according to the safety level. 

This mark calls for your attention to a possible danger. 
Read the accompanying instructions carefully to ensure safe use.

WARNING

CAUTION

PROHIBITION

Failure to obey this prohibition can result in malfunction or safety accident.

Do not operate the elliptical in any other way 
than stated in this manual. 

Do not install the elliptical near water, in very 
dusty or humid areas or on thick carpeting to 
avoid damage.

Do not use the elliptical in case that the power 
cord is damaged or the elliptical does not work 
normally.

Do not operate the elliptical if it is doused with 
water or other liquid. Stop the machine and 
contact customer service immediately.

Do not leave the power cord near the fire or 

excessive heat 

(for elliptical with TV monitor)

.

Do not attempt to repair or modify the elliptical 

unless a qualified engineer. 

Do not use a multi-socket simultaneously for other 

electrical equipment to avoid fire due to overload 

(for elliptical with TV monitor)

Prevent foreign matters from getting into moving 
parts. Prevent clothing or any part of your body 
from touching moving parts. 

PROHIBITION

Failure to obey this warning can result in injury or death.

Always unplug the power cord after use of the 
elliptical or before cleaning or maintenance 

(only 

for elliptical with TV monitor)

 to avoid electric shock. 

Stepping on the display console or on the seat 
may cause damage or accident.

Check for proper assembly before first use and 

do not attach any accessory not recommended 
by the manufacturer as it may be hazardous. 

The elliptical uses power of AC 100V to AC 240V 
at 50/60HZ. To reduce danger of accident when it 
breaks down, connect the power plug to a ground 
socket as required by the law. 

WARNING

2. Safety Instruction 

4

Summary of Contents for HET-700S





























Reviews: