background image

This warranty is only extended to original consumer purchasers of 

our products.  This warranty gives you specific legal rights and

you may also have other legal rights that vary from state to state

.

MERITS WARRANTIES THE PRODUCTS MANUFACTURED BY 

IT TO BE FREE OF DEFECTIVE MATERIALS FOR A PERIOD

OF ONE (1) YEAR.  THE FRAME OF THE PRODUCT HAS A

LIFETIME WARRANTY AGAINST MANUFACTURER DEFECTS.

IF THE PRODUCT OR ANY OF IT’S COMPONENTS ARE ALTERED

IN ANY WAY, THE WARRANTY BECOMES NULL AND VOID.

PROBLEMS AND BREAKAGE OF PRODUCT RESULTING FROM

ABUSE OR MIS-HANDLING ARE NOT COVERED UNDER 

WARRANTY.  IF YOU EXPERIENCE A PROBLEM, PLEASE 

CONTACT YOUR DISTRIBUTOR FOR REPAIR SERVICE.

REPLACEMENT OR MODIFICATION OF PRODUCT COMPONENTS

ARE NOT COVERED UNDER WARRANTY IF THEY ARE NOT

MANUFACTURED OR APPROVED BY MERITS.

The forgoing warranty is exclusive and in lieu of all other express 

warranties, implied warranties, if any, including but not limited to the

implied warranties of merchantability and fitness of particular

purpose, shall not extend beyond the duration of the express

warranty provided therein.

MERITS

 shall not be liable for any

consequential or incidental damages whatsoever

.

Some states do not allow the exclusion or limitations of incidental or

consequential damage, or limitation on how long an implied warranty

lasts, so the above exclusion and limitation may not apply to you

.

LIMITED WARRANTY

Summary of Contents for M2TC












Reviews: