FOR M4T, DETACHABLE ARMRESTS:
TO INSTALL
1- Align arm over receive sockets located beside the side frame.
2- Push down on armrest until detent is engaged and lock clicks
into place.
TO REMOVE
1- Press down detent lever located on the receiver sockets
located beside the side fame.
2- Holding the armrest in the center, pull up on arm until it is free
of the receive sockets.
When removing armrest of M4TV, be sure to pull straight up to
prevent armrest tubes from becoming wedged in receiver sockets.
To correct this problem, push armrest back down into place and
repeat the process, emphasizing on upward with a straight and
even motion.
SWINGAWAY FOOTREST / LEGRESTS
INSTALLATION
1- Engage both wheel locks.
2- Place footrests on the 2-pin hanger plate offset to outside of
the frame. Make sure the holes on the footrest / legrest bracket
are well seated over both mounting posts.
3- Swing footrest toward inside of chair until it locks into place.
FOOTPLATE HEIGHT
ADJUSTMENT
1- Loosen bolt located on the bottom of footrest tube (pivot and
slide tube).
2- Slide up and down to your desired position.
3- Tighten nut securely.
GETTING TO KNOW YOUR CHAIR
