5
STEP 1
Install the Front bottom tube (2) and
Rear bottom tube (3) to the Main frame
(1) with the Allen bolt (17), Spring washer
(18) and Arc washer (16) as shown.
STEP 2
A: Sleeve the Mast cover (58) onto the Handlebar
post (4)
B: Connect the Extension wire (50) with Sensor
wire (57) properly at first, and then lock the Handle-
bar post (4) onto the Main frame (1) with the Allen
bolt (53), Spring washer (18) and Flat washer (12)
as shown;
C: Sleeve down the Mast cover (58) and lock it
tightly.
