6
STEP 3
A: Insert the Long shaft (56) to the Handlebar post (4), attach the Swing tube (7L/R) on the Long shaft (56)
with Allen bolt (26), Spring washer (25), D-shape washer (24) and Wave washer (21). Not to tighten till now.
B: Lock the Pedal (34L/R) on the Pedal support (8L/R) tightly with Hex bolt (33), Flat washer (12) .
C: Fix the Pedal support (8L/R) on the Crank (20) with Allen bolt (26), Spring washer (25), D-shape washer
(24) and Wave washer (21). Not to tighten till now.
D: Connect the Swing tube (7L/R) and Pedal support (8L/R) together with the bolt (37), Flat washer (38), Flat
washer (30) and Nylon nut (31) as shown. And then lock the above mentioned Allen bolt (26), Bolt (37) and
Nylon nut (31) tightly.