14
16. Insert the Upright Wire (81) and the handrail wire
(F) through the two indicated looped ties on the
console assembly (G).
See the inset drawing.
Connect the Upright
Wire (81) and the handrail wire (F) to the console
wires.
The connectors should slide together
easily and snap into place.
If they do not, turn
one connector and try again.
IF YOU DO NOT
CONNECT THE CONNECTORS PROPERLY,
THE CONSOLE MAY BECOME DAMAGED
WHEN YOU TURN ON THE POWER.
Insert all excess wires into the console assembly
(G). Then, pull the two ties tight against the wires
and cut off the ends of the ties.
16
G
81
Ties
F
Console
Wire
15
15. Attach the Tray (88) to the Upright Crossbar
(31) with four #8 x 3/4" Screws (2);
start all four
Screws, and then tighten them.
2
31
2
88
81
Console
Wires
F
