7
2. Identify the Left Upright (75), which is marked
“Left.” Have a second person hold the Left
Upright near the Base (80).
See the inset drawing.
Tie the wire tie in the
Left Upright (75) securely around the end of the
Upright Wire (70). Then, insert the Upright Wire
into the lower end of the Left Upright as you pull
the other end of the wire tie completely through
the Left Upright.
2
70
75
75
Wire
Tie
70
Wire Tie
1.
Make sure that the power cord is unplugged.
Remove the ties securing the Upright Wire (70)
to the Base (80). Pull the Upright Wire and the
Base Ground Wire (92) through the indicated
hole in the Base (80).
Attach the Base Ground Wire (92) to the Base
(80) with a #8 x 1/2" Ground Screw (1).
Press a Base Cap (77) into each side of the
Base (80). Make sure the Grommet (67) is
pressed into the square hole in the Base.
See the inset drawing.
Cut the plastic tie near
the Upright Wire (70).
Be careful not to dam-
age the Upright Wire.
70
1
Hole
1
92
77
67
80
Cut
70
Tie
