7
9.
Make sure that all parts of the elliptical crosstrainer are properly tightened.
Note: Some hardware may
be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical crosstrainer.
8
20
15
38
14
13
8. Identify the Left Pedal (13). Attach the Left Pedal to the
left Pedal Spring (14) with an Adjustment Bolt (20), an
M10 Washer (38), and an Adjustment Knob (15) as
shown. Note: The Left Pedal can be attached in several
positions using the five positions in the Left Pedal and
the three holes in the Pedal Spring (see HOW TO
ADJUST THE PEDALS on page 10).
Attach the Right Pedal (not shown) in the same way.
Make sure that both Pedals are in the same hole and in
the same pedal position.
