background image

15

FEATURES OF THE CONSOLE

The advanced console offers an array of features 
designed to make your workouts more effective and 
enjoyable. 

When you use the manual mode of the console, you 
can change the resistance of the pedals and the incline 
of the ramp with the touch of a button. While you 
exercise, the console will display continuous exercise 
feedback. You can also measure your heart rate using 
the handgrip heart rate monitor. 

The console offers twenty preset workouts——ten target 
toning workouts and ten performance workouts. Each 
workout automatically changes the resistance of the 
pedals and the incline of the ramp and prompts you to 
vary your pedaling pace as it guides you through an 
effective workout.

The console also features an iFit training mode that 
allows you to connect to your wireless network through 

an iFit Live module. The optional iFit Live module 
allows you to download personalized workouts and 
to track and analyze workout information on the iFit 
Live website. 

To purchase an iFit Live module at 

any time, go to www.iFit.com or call the telephone 
number on the front cover of this manual. 

You can even connect your MP3 player or CD player 
to the console sound system and listen to your favorite 
music or audio books while you exercise.

To turn on the power,

 see page 16.

 To use the 

manual mode,

 see page 16. 

To use a preset 

workout,

 see page 18. 

To use the iFit training 

mode,

 see page 19. 

To use the sound system,

 

see page 19. 

To use the information mode,

 see 

page 19.

Note: If there is a sheet of plastic on the display, 
remove the plastic.

CONSOLE DIAGRAM

Summary of Contents for H95e Elliptical





























Reviews: