22
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down either of the
Stop buttons while inserting the key into the console.
When the information mode is selected, the following
information will be shown:
The Time/Segment Time
display will show the total
number of hours that the
treadmill has been used.
The Distance/Incline display
will show the total number of
miles that the walking belt
has moved.
An ÒE,Ó for English miles, or
an ÒM,Ó for metric kilometers,
will appear in the Speed dis-
play. Press the Speed
▲
▲
button to change the unit of
measurement.
IMPORTANT: The
Pulse/Calories display
should be blank.
If a ÒdÓ
appears in the display, the
console is in the ÒdemoÓ
mode. This mode is in-
tended to be used only
when a treadmill is displayed in a store. When the con-
sole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the but-
tons on the console will not operate.
If a ÒdÓ appears
in the Pulse/Calories display when the information
mode is selected, press the Speed
▼
▼
button so the
Pulse/Calories display is blank.
To exit the information mode, remove the key from the
console.
THE OPTIONAL HANDGRIP PULSE SENSOR
An optional handgrip
pulse sensor allows
you to conveniently
measure your heart
rate before you begin
exercising, during your
workout, and after you
finish.
To purchase
the optional handgrip
pulse sensor, call
toll-free 1-800-201-
2172.
Note: The consoleÕs pulse programs require the use
of the chest pulse sensor.
