19
PROBLEM
SOLUTION
a.
If the walking belt has shifted to the
left,
first remove the key and
UNPLUG
THE POWER CORD
. Using the allen
wrench, turn the left rear roller adjustment
bolt clockwise, and the right bolt counter-
clockwise, 1/4 of a turn each. Be careful
not to overtighten the walking belt. Plug in
the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is centered.
b.
If the walking belt has shifted to the
right,
first remove the key and
UNPLUG
THE POWER CORD
. Using the allen
wrench, turn the left rear roller adjustment
bolt counterclockwise, and the right bolt
clockwise, 1/4 of a turn each. Be careful
not to overtighten the walking belt. Plug in
the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is centered.
c.
If the walking belt slips when walked
on,
first remove the key and
UNPLUG
THE POWER CORD
. Using the allen
wrench, turn both rear roller adjustment
bolts clockwise, 1/4 of a turn. When the
walking belt is correctly tightened, you
should be able to lift
the edges
of the
walking belt 3 to 4 inches off the walking
platform. Be careful to keep the walking belt centered. Plug in the power cord, in-
sert the key and run the treadmill for a few minutes. Repeat until the walking belt
is properly tightened.
a. The stainless steel walking platform can be cleaned with a stainless steel cleaner
or mild soap and water and a soft cloth. Never use solvents or abrasive cleaners.
a
b
c
4. The walking belt is
off-center or slips
when walked on
5. The stainless steel
cover needs to be
cleaned
