Healthstream HC10TVUB, Owner'S Manual

19

2010/2/26 Ver1.0+V1.0 

standby directly to choose. 

4.

After setting parameter, press

 or press

  during setting to start program (It 

will be start by default if there is no parameter need to be adjust).The target value will be 
carried out by count down. (Parameter will make measure according value you enter) 

5.

Under THR mode, the target heartbeat value will automatically calculate according to the 
input age of users. 

6.

If it can’t detect pulse, it will shoe NO PLUSE on the screen. If it can’t detect pulse for 45 
seconds, it will turn back to standby itself. 

7.

RPM need be from70RPM to 80RPM during training. If RPM can’t reach 70RPM, it will 
show ”RPM

↑

”on the screen. If RPM rather than 80RPM, it will show ”RPM

↓

”on the 

screen 

8.

HR CONTROL Mode

：

Preset heartbeat control mode is 50W (Level2). When computer detects the pulse, the 
heartbeat value will be judged every 10 seconds. 

Judgment method of Heartbeat value as follows: 

A.

While running, program will compare actual heartbeat value with preset 
heartbeat value. If 

actual heartbeat value 

≦

preset heartbeat value 15, 

WATT 

will increase 20 automatically, the highest can reach 400 WATT. 

B.

While running, program will compare actual heartbeat value with preset 
heartbeat value. If 

actual heartbeat value 

≦

preset heartbeat value 5, 

WATT 

will increase 10 automatically, the highest can reach 400 WATT. 

C.

While running, program will compare actual heartbeat value with preset 
heartbeat value. If 

actual heartbeat value 

≧

preset heartbeat value 5, 

WATT 

will decrease 10 automatically, the lowest can reach 50WATT. 

D.

While running, program will compare actual heartbeat value with preset 
heartbeat value. If 

actual heartbeat value 

≧

preset heartbeat value 15, 

WATT 

will decrease 20 automatically, the lowest can reach 50WATT. 

9.

While running, program will compare actual heartbeat value with preset heartbeat value. If 

actual heartbeat value 

≧

preset heartbeat value 30, 

WATT will decrease down to 

50WATT. The program will not carry out until 

heartbeat value 

≦

preset heartbeat value 

5.

10.

This chart is about Age and Pulse Value (default value) for THR Function.