21
2010/2/26 Ver1.0+V1.0
challenge time of target distance. Press
to adjust. At the time, program
will compute race speed of monitor according the value user entered.
2.
Press
to start race. After showing3,2,1 on screen, user start race with monitor.
3.
If the value which user entered is invalid, user should adjust, otherwise, this mode
can’t be started.
4.
Press
directly to carry out program during setting parameter (It will be start
by default of 0.1km/1 minute and 40 seconds if there is no target distance and
challenge time need to be adjust. The target distance will be carried out by count
down.
5.
Blue point means user and red point means monitor in the playground. In the lower
left quarter of playground, it will show how much the monitor is ahead or behind user.
The speed of monitor is set with target distance /target time (KM/HR). And user can
only adjust his own resistance. When user (blue point) is behind monitor, it will
reduce the resistance of unit to catch the monitor(red point)
6.
When one of player catches the target distance, the unit will stop itself and show the
account number.
z
Program Mode
1.
After entering this mode, user can choose six automatic program: Rolling
、
Fat burn
、
Aerobic
、
Hill run
、
Hill climb and Hill intervals.
2.
After entering one of six modes, press
or
to adjust difficulty of
level. There are total 10 levels of difficulty.
3.
After choosing LEVEL, press
,
then press
to adjust WEIGHT(default :
70KG
;
range: 23-180KG) and TIME(default:10 minutes
;
range
:
0
,
10-99min)
4.
If you want to modify parameter, press
return to the first item to re-set or press
Summary of Contents for HC10TVUB
