Switch On
Then the display shows MANUAL, PROGRAM, H.R.C.(age), USER and WATT. Use
After connecting the battery and/or after pressing any button the display will
pushing the knob (MODE). Follow same procedure to enter month (2 digits),
day(2 digits which can exceed 12) and clock (4 digits seperate by colon).
-22-
POWER SWITCH (ON-OFF)
CHARGE INDICATORS
MINI-B USB PORT
MINI-B USB PLUG
CONNECT
PS Shell
BATTERY CHARGE INSTRUCTION
INSTRUCTIONS FOR BATTERY
1. Switch OFF the battery to before charging the battery.
2. Connect Mini-B USB pin to Mini-B port.
3. Connect Type A USB pin to Type A USB port.
4. Plug the adaptor into power socket.
6. LED light would show red while charging and while
electric capacity is under 20%. Green for fully charged.
7. Remove from power socket when charge is completed.
8. Enjoy the green power tech by plug Mini-B USB pin into
9. Recommendation:
a. Switch OFF while re-charging.
b. Allow 6+ hours when re-charging the battery.
•
Use designated battery and battery charger.
•
Charge 12+ straight hours when charging the battery for
•
Ensure to apply battery and battery charger indoor.
•
Always utilize the battery in environment temperature
between 10°C to 35°C.(same as battery temperature)
Summary of Contents for HS 3.2 EL
