5
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
www. healthstreamfitness.com.au
Free call number 1300 796 636
POLYFOAM(2)
B
J2
J1
A
POLYFOAM(1)
POLYFOAM(1)
E
D
HOW TO REMOVE STYLISH POLY-FOAM
Open the carton, then you will see as left
showing.
Take out all the components,
except the machine, then remove the
POLYFOAM (1) and take out the components
inside the polyfoam.
Please put these components at side for further
assemble.
Put the POLYFOAM(1) back to it’s original
position, then turn the whole unit by 90 degree.
(As shown).
You are ready to go on for following assemble.
HOW TO ASSEMBLE THE FRONT STABILIZER
Equip the front stabilizer (B) onto main frame and tight it with screws(J1)and washers (J2).
After equipped, turn the machine as the direction of next figure 3 shown.