Assembly
9
Figure 5
Step 1:
Attach the left pedal (35) to the left crank. The left pedal is marked with an
"L"
. Turn the
threads on the pedal
counter-clockwise
to secure it to the crank.
Step 2:
Attach the right pedal (34) to the right crank. The right pedal is marked with an
"R"
. Turn
the threads on the pedal
clockwise
to secure it to the crank.
Step 3
Attach the pedal straps (35a and 34a) to the appropriate pedal. Each strap is marked with an
"L" or an "R". The side with 2 holes will go on the clip towards the inside of the unit.
Figure 6
Step 1:
Attach the front handlebar (41) to the
console tube (39) using hex head screws
(20), washers (4), locknuts (31), and
hex head screw (24).
