HealthUp
IoT Gateway
Multifunctional Smart Healthcare IoT Gateway
Overview
How to Install
QUICK
START
GUIDE
English
Warranty Card
Warranty Period
12 months after you purchase this item
Free Service
Supposing any defects caused by quality issues occur within the warranty period,
Please take this warranty card and purchase receipts to your distributor for free
exchange service
Free exchange service will not be accessed under following circumstances:
1. Damages caused unauthorized disassembly.
2. Defect or physical damages caused by leaking or dropping off.
3. Damages by act of God.
Supposing your item is within any damages or defects except the above circumstances,
please return to us or your distributor for free exchange service.
LED
Sensor
DC IN
(5V 1A)
PoE
RJ45
Micro
USB
Reset
WPS
#8(4.2mm)
Not provided
Antenna
Connector
(SMA Type)
Antenna
Connector
(SMA Type)
Step #1
Select a power method.
You can choose from DC IN, PoE RJ45 and Micro USB.
(PoE requires additional power connection if power is not available.)
Step #2
Check the LED status.
1) Blue: Indicates the booting status and display for 15 seconds.
2) White: Indicates normal operation.
3) Red: Indicates network failure.
Step#3
Check and note the IP address in the router (or switch hub) settings.
Step #4
Enter the IP address you noted in Step # 3 into the Internet browser address bar.
Then enter the settings in order.
HealthUp OG-BT5UW100
INPUT: 5.0V / 2.0A Max
KC ID: R-R-oic-BT5UW100
FCC ID: 2AVY3BT5UW100
Manufactured by Openit Inc. in Seoul
Made in Korea
FCC Notice
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Exceeding maximum input current specification(2.5A) may damage device.
