Once flashing temperature has stopped, the
indicator displays the actual temperature
measured at the core of the Mat.
Press and hold or to reach desired
numbers faster.
Default PEMF frequency is set to 7.83 Hz and
displayed as 8 Hz.
PEMF can be turned on or off at any time with
or without heat.
Controller instructions can be found at any
time at HealthyLine.com/controllers.
INFORMATION
INSPIRED BY
NATURE
,
PERFECTED BY
SCIENCE
.
7
CONTROLLER FOR BEGINNERS (OPTIONAL)
CONTROLLER INSTRUCTIONS
TIME
TIME
Press the TIME button to initiate time adjustment mode (the time
indicator will start flashing). Set the desired time and press the TIME
button again to save the setting.
TIMER
SET & ADJUST
To turn PEMF OFF.
PEMF
Press & Hold
for 6 sec
PEMF
PEMF
PEMF
Press the PEMF button once to turn PEMF ON. Press PEMF again to
initiate PEMF frequency adjustment mode (PEMF indicator will start
flashing). Set the desired frequency (1-30 Hz) and press the PEMF
button again to save the setting.
PEMF
SET & ADJUST
To switch between
Fahrenheit & Celsius
TIME
Press &
Hold for
6 sec
°F or °C
UNITS SET
TEMP
TEMP
TEMP
Press the TEMP button once to turn ON the heat. Press TEMP again
to initiate temperature adjustment mode (the temperature indicator
will start flashing). Set the desired temperature and press TEMP
again to save the setting.
TEMPERATURE
SET & ADJUST
Press the Power button to turn ON the
controller. TEMP, TIMER, PEMF, and PHOTON
indicators will light up on the screen.
POWER
FACTORY RESET
WITH THE CONTROLLER ON
The controller will shut down and then turn back ON automatically.
Press & Hold for 10 sec.
PHOTON LIGHT
ON/OFF
Press the button to turn lights ON or OFF.
PHOTON
