Clear Code
Please note:
On a rare occasion you may need to un-pair
EchoAlert® Bell Push from master unit. Please follow instructions
below:
•
Remove the battery from the EchoAlert® Bell Push.
•
Press and hold EchoAlert® Bell Push button and re-insert battery
whilst button is pressed.
•
Red LED light comes on for approximately 3 sec. Once red light
goes out release button and press it once again quickly.
•
EchoAlert® Bell Push is now un-paired.
Low battery indicator
•
The EchoAlert® Vibrating Pager indicator
○
1
flashes blue once
every 5 sec. to indicate EchoAlert® Bell Push batteries are low and
need changing.
Technical Specifications:
Model Number: GS384
Power Source: CR2450 button battery×1, (3V
）
Standby power consumption: ≤6 μA
Trigger current
：
30mA max
Battery Life: Approx. 2 years
（
5 times per day
）
Standard: RoHS, CE, UKCA
Humidity: 10%-90% relative humidity (RH)
Temperature Range: 0
℃
～
50
℃
