•
NOTE: WEEKLY TESTING REQUIRED.
Test unit weekly to ensure proper
operation by pressing test button. It
will sound the alarm if smoke alarm
operates properly.
DO NOT USE
OPEN FLAME
to test your alarm
.
Operation:
Connect your smoke alarms to master device.
Please note
: this unit should already be paired and ready to use. If for
any reason set requires re-pairing, please follow instruction below.
1.
Enter pairing mode on EchoAlert® Vibrating Pager (master device)
by quickly pressing the test button three times.
2.
The orange LED will light up, followed by red and white LEDs. This
indicates that EchoAlert® Vibrating Pager is in pairing mode.
3.
Enter pairing mode on EchoAlert® Smoke Alarm by quickly pressing
TEST button three times.
4.
The EchoAlert® Smoke Alarm green LED will light up to indicate that
the smoke alarm is in pairing mode and then will pair automatically.
5.
Repeat step 1 to 4 for connecting more smoke alarms. Make sure
you always use the same master device!
6.
Test if your smoke alarms are connected successfully by pressing
and holding (3sec) test button of any smoke alarm paired. The red
a
switch
ated
