Clear Code
Please note:
On a rare occasion you may need to un-pair
accessories from the master unit. Please follow instructions below:
•
Remove the battery from the master unit (pager).
•
Press and hold TEST&RESET button
○
7 and re-insert battery whilst
button is pressed.
•
Green LED light
○
3 comes on for approx. 3 sec. Once green light
goes out release TEST&RESET button
○
7 and press it once again
quickly.
•
Master unit is un-paired with any accessories.
Smoke Alarm Connection Test
Please be aware
that this test is to confirm if EchoAlert® Smoke
Alarm is successfully paired with EchoAlert® Vibrating Pager (master
unit).
For regular smoke alarm testing please see separate EchoAlert®
Smoke Alarm instruction provided.
•
Press and hold EchoAlert® Vibrating Pager TEST&RESET button
○
7
for 3 seconds. Pager LEDs will flash three times together with one
vibration. Test signal will be sent to EchoAlert® Smoke Alarm. If
signal received successfully Smoke Alarm red light will flash quickly.
•
To leave Smoke Alarm testing mode press smoke alarm TEST
button once or after 5 minutes it will leave it automatically.
