background image

12

Manual

1

Transmitter

Working voltage

~

orking current

working current

working current of input

~

Input Working currentof MIC

Maximum output power

3.7V (3.2V 4.2V)

Static w

19

3mA

Dynamic

45mA

Maximum

25mA

Input signal rage                                       100 mV 800 mV

20mA

Receiving frequency                                 2.3MHz

0.02MHz

Distortion

1%

S/N ratio

70dB

800mV / 25mW

LI-ion battery charging time                   3~4h

±

±

2

Receiver

Working time

Working voltage

12V

0.8V, 400mA

Working current

95    8mA

Standby current

10    4mA

Trans. frequency

2.3MHz

0.02MHz

Signal input limiting volt.

400mV

Signal standby starting volt.

50mV

Signal input standby volt.

40mV

Signal input frequency

20Hz - 20KHz

Signal input range

120mV-1.5V

Li-ion battery recharging current

125    5mA

Transmission distance

10M

No signal standby time

±

±

±

±

±

12 hours for TV IR listener function
24 hours for personal listener function

60s

5s(when no signal is received,the

transmitter goes into standby mode

automatically)

±

F. Technical specifications

01

03

Manual

B. Introduction and Product features

Introduction

Features

EchoIR

EchoIR

is a most versatile and technically sophisticated infra red listening system.

This equipment will give you complete freedom to listen to your favorite TV or
programs, enjoy music or conversation, without irritating leads running across
the floor. A microphone is also included to further enhance the flexibility of the
system allowing it to be used as a personal listener to assist when talking, using the
telephone or computer. Please read these instructions carefully as they will ensure
that you get the most out of your new

system.

radio

1.High power transmitter gives excellent range with high quality audio sound.

2.Automatic signal control circuit adjusts any sudden volume increases to

keep the output volume stable.

3.Balance control allows individual setting of balance for left and right ears

headset version only.

4.Tone control, easy to adjust to individuals preferred setting.

5.Duel charging bay on transmitter for option of two receivers.

6.Comfortable lightweight receiver only 55gms.

7.Comfortable in the ear design soft ear buds to provide maximum amplification

with maximum outside noise reduction.

8.Audio and microphone inputs on headset enable headset to be used as a

personal listener without use of the transmitter.

9.Approximately 12 hours of listening pleasure on a single full charge.

10.Li-ion charging with auto switch off.

Note: balance is pre-set for neckloop system and must

not be adjusted.

Summary of Contents for EchoIR









Reviews: