Manual
04
1
Transmitter
、
2
Receivers
、
3
Audio cable for tranmsitter
、
5
Microphone
、
cable
4
Audio cable2
、
6
Wired headphone cable
、
C. Product parts
11
M
IC I
N
M
IC I
N
4.telephone
5.
mobile phone
If using the EchoIR with a mobile phone do not hold the phone too close to the
receiver to ensure you do not get interference from the phone.
Manual
EchoIR
Ensure the volume is set to off on the receiver,
can also be used for talking via a computer.
1.Pug the microphone cable into the Mic in
socket of a computer and clip the microphone
on to your lapel close to your mouth.
2.Connect one end of the stereo patch lead to the
headphone socket on the computer and the other
end into the LINE IN on the receiver.
then switch it on and adjust the volume and tone
to your required levels. (note the volume of the
headphone setting may need to be adjusted on
your computer)
Charging the EchoIR
The charge light will only come on if the battery
requires charging.
Switch off the receiver prior to charging.
Place the receiver into the charging bay of the
transmitter, the receiver can only fit into the bay
if the EchoIR logo is facing to the front.
When inserted correctly you will feel it click into
place. Whilst charging the light on the left side of
the transmitter will be Lit.
Once charging is complete the light will go out.
Charging is monitored automatically and
charging will stop as soon as the battery is full.
Headset receiver
Neckloop receiver
