The HDR200 charges within the white charger base. We recommend
fully charging the hearing instrument prior to the initial usage. A full
charge takes 2.5-3.5 hours, and will allow for up to 20 hours of use.
If you need to use the hearing instruments before the charging cycle
is complete, the operation time can be shorter than usual.
Connect the micro-USB end of the cable into the charger base,
and the other standard USB side into the AC adaptor, a computer
USB port or any other standard USB power source.
The charger base light will glow green when working normally.
Do not put HDR200 into the charger base if it glows red; contact
Hearing Direct.
Place the HDR200 upright into the charger base. The hearing
instrument can be inserted facing forwards or backwards and
into either the left or right charging holes.
Charging the
rechargeable
battery
(HDR200 only)
When the hearing instrument is placed correctly in the charger the
HDR200 charging indicator light will glow blue to indicate that the
hearing instrument is being charged.
This LED indicator turns green when battery is fully charged and ready
to be turned on for use.
There is no negative effect to the HDR200 remaining in the charger
after being fully charged since the advanced circuitry regulates the
voltage and monitors the instrument charged condition/status.
Top View
Side View
6
7
