7
Hearth & Home Technologies • PHSI-MCE
Instructions • 2560-973 • 6/20
9. Install collars over the openings using hurricane
screws provided in the kit. PHSI-MCE kits must be
installed on the two inside passive heat knockouts.
See Figure 5.10 and Figure 5.11.
WARNING! Risk of Fire!
Remove all debris and objects
from firebox top and appliance top before operating the
appliance.
8. Inspect for and remove all debris that may have
accumulated or objects that may have been placed on
the firebox top and appliance top during the installation
process. All debris and objects must be removed
prior to operation of the appliance. Firebox top and
appliance top are shown in Figure 5.9.
Figure 5.9
APPLIANCE TOP
FIREBOX TOP
Figure 5.10 Remove Passive Heat Knockouts
WARNING! Risk of Fire!
DO NOT remove appliance
heat management knock-outs unless an approved
heat management system is installed. Appliance and
combustible materials will overheat.
COLLAR LOCATIONS
