background image

20

04/21

7058-805F

D. High Ash Fuel Content Maintenance

• 

Frequency:

 As needed

• 

By:

 Homeowner

Poor quality pellet fuel, or lack of maintenance, can create 

conditions that make the firepot fill quickly with ashes and 

clinkers.

This condition makes the appliance susceptible to 

overfilling the firepot with pellets which may result in 

smoking, sooting and possible hopper fires. 

Figure 20.1

 

shows an example where the firepot overfills, pellets 

back up into the feed tube and ash has accumulated in 

the firebox.

An inefficient and non-economical method of burning of fuel 

caused by poor quality pellet fuel is shown in 

Figure 20.2

.

The correct flame size when good quality, premium pellet 

fuel is burned is shown in 

Figure 20.3

.

If the ash buildup exceeds the half way point in the firepot 

IMMEDIATE ATTENTION AND CLEANING IS REQUIRED.

E. Soot or Creosote Fire 

Establish a routine for the fuel, wood burner and firing 

technique. Check daily for creosote build-up until 

experience shows how often you need to clean to be 

safe. Be aware that the hotter the fire the less creosote is 

deposited, and weekly cleaning may be necessary in the 

mild weather even though monthly cleaning may be enough 
in the coldest months. Contact your local municipal or 

provincial fire authority for information on how to handle a 

chimney fire.

In the event of a soot or creosote fire, close the firebox 

door, exit the building immediately and contact the 

proper fire authorities.

DO NOT under any circumstances re-enter the building.

Figure 20.3

Figure 20.1

Figure 20.2

WARNING

Fire Risk

• 

High ash fuels, or lack of maintenance, 

can cause the firepot to overfill. Follow 

proper shutdown procedure if ash buildup 

exceeds halfway point in firepot. 

• 

Failure to do could result in smoking, 

sooting and possible hopper fires.

Correct Flame Height 
Yellow/White in Color

Tall, Lazy Flame 

Orange in Color

Incorrect Flame Height 

Tall, Lazy Flame 

Orange in Color

Ash build-up in Firebox

Ash build-up in Firebox

Firepot Overfills

Firepot Overfills

Pellets Back-up in Feed Tube

Pellets Back-up in Feed Tube

Summary of Contents for Quadra-Fire PS35-C









































Reviews: