27
04/21
7058-805F
G. Glass Replacement
1.
Open the door from the appliance by lifting door off of
hinge pins and lay on a flat surface face down.
2.
Using a Phillips Head screw driver, remove the 4
brackets and set aside
(Figure 27.1)
.
3. Remove old glass and replace with the new glass.
4.
Re-install the brackets using the same screws.
Figure 27.1
•
Glass is 5mm thick high temperature
heat-resistant ceramic glass.
•
DO NOT REPLACE with any
other material.
•
Alternate material may shatter and
cause injury.
WARNING
1
2
3
4
Glass Assembly
Remove the 4
brackets outlined
in the diagram
