21
Outdoor Griddles (Models 830-3852, 830-3052, 830-2052)
19 11/16"
500mm
*
32 1/16"
815mm
* 7"
178mm
* 4"
102mm
* 1 1/4"
31mm * 10"
254mm
40 1/16"
1018mm
22 1/16"
561mm
8 1/4"
210mm
*
The Griddle is designed for easy installation into masonry enclosures. The griddle is intended either for
installation in a built-in enclosure constructed of non-combustible materials or for an installation in a built-in
enclosure constructed of combustible material when installed with a HearthStone Outdoor Build-In Liner.
Standard Cutout Dimensions
For non-combustible applications, the griddle drops into the opening shown in the cutout detail drawing.
A deck is required to support it from the bottom.
* Dimensions for all sizes
Brabura 40
Brabura 32
Brabura 22
INSTALLATION - BUILT-IN
Locating the Griddle
When determining a suitable location, take into account concerns such as exposure to wind, proximity to
traffic paths, and keeping any gas supply line as short as possible.
-
Locate the unit in a well-ventilated area.
-
The counter and supporting ledges or deck must be level and flat.
-
The enclosure should have ventilation holes to prevent gas build-up in the event of a leak.
HearthStone recommends installing the manual shut-off valve in a location readily accessible by the customer,
so that gas to the appliance can be shut off in an emergency situation. However, the appliance must not be
modified in any way to accommodate such placement.