Hearthstone Quality Home Heating Products, Inc.
Bristol DX Model 8762
28
Log Set, & Screen Placement
CAUTION: FRAGILE! HANDLE LOG SET WITH
CARE. ALWAYS WEAR GLOVES AND SAFETY
GOGGLES WHILE HANDLING THE LOG SET.
WARNING: Failure to position the burner and logs
in accordance with these diagrams or failure to
use only parts specifically approved with this
appliance may result in property damage or
personal injury.
Place only the ceramic log set supplied with the unit
in the firebox. Do not place any other ceramic logs,
wood logs, or other materials in the firebox. If the
log set is damaged or broken contact your dealer for
replacement. The ceramic logs will last a long time;
however, they will break if subjected to rough or
improper handling.
Exact positioning of the log set
is required in order to obtain a pleasing flame
pattern and efficient combustion.
Incorrect log
placement may cause carbon build-up; excess
thermal stress on the log set and stove parts,
reduced efficiency, and high levels of carbon
monoxide. If the log set does not fit into the firebox
exactly as outlined, contact your dealer for
assistance.
Installation of the Log Set
(Refer to the following images in this section for log
set assembly)
1. Remove the packaging material around the log
set assembly. Be careful not to damage the log
set when unpacking.
Photo 1
– Burner Without Log Set Detail
2. Place log 1 on burner in its channel as shown.
Photo 2
– Log 1 in Position
3. Place Log 2 into the channel in the burner with
the narrow end resting on log 1as shown.
Photo 3
– Log 2 in Position
4. Place log 3 as shown.
Photo 4
– Log 3 in Position
1
1
2
2
1
3
