Hearthstone Quality Home Heating Products, Inc
CHAMPLAIN DV Model 8301
L
OG
P
LACEMENT
Place only the decorative fiber log set supplied with
the unit in the firebox. This log set is specifically
designed for the provided pan burner. Do not use
any other type of fiber logs, wood logs, or other
materials in the firebox. If the original log set is
damaged, or broken, contact your Hearthstone
dealer for replacement. The decorative fiber log set
is durable, however, they will break easily if
subjected to rough or improper handling.
Position the log set exactly as shown in order to
obtain a pleasing flame pattern and efficient
combustion. Incorrect log placement can cause
carbon build-up; excess thermal stress on the log
set and stove parts, reduced efficiency, and high
levels of carbon monoxide. If the log set does not fit
into the firebox exactly as outlined, contact your
dealer for assistance.
I
NSTALLATION OF THE
L
OG
S
ET
CAUTION: DO NOT PLACE EMBERS NEAR THE
PILOT.
(Refer to the figures in this section)
1. If not already opened, follow the instructions for
firebox access on page 8.
2. Remove the packaging material around the log
set assembly. Be careful not to damage the log
set when unpacking. Observe the 5 mounting
“posts”, A, B, C, D, and E.
3. Gently slide the Y-shaped Log (1) onto pins A
and C, as shown next.
4. Gently slide the longer, “half” log (2) onto pin D.
Be sure to position the rear of the log in front of
the pilot assembly and against the left side of
the firebox as shown below.
5. Gently slide the shortest of the “half” logs (3)
onto pin B as shown below.
6. Gently slide the medium length of the “half” logs
(4) onto pin E as shown next.
Page 18 of 30
