Hearthstone Quality Home Heating Products, Inc
CHAMPLAIN DV Model 8301
Page 21 of 30
Figure 17:
T
YPICAL
F
LAME
P
ATTERN
G
AS
C
ONVERSIONS
Each Champlain stove is factory set for use with
Natural Gas. However, conversion is easy for use
with LP, and visa versa. Follow the instructions
provided with the included conversion kit.
ONLY A QUALIFIED GAS TECHNICIAN
SHOULD DO THE CONVERSION.
For checking, and properly adjusting, the manifold
pressure, refer to the
Gas Connection section on
page 17
of this manual.
Leak test before, and after,
lighting the stove.
Fill out the label provided on back of the stove.
Verify the input rate of the heater by checking the
manifold pressure. If the manifold pressure is
correct, then the input rate is also correct. Ensure to
check the manifold pressure and properly adjust the
pilot and main burner flames if necessary.
