Hearthstone Quality Home Heating Products, Inc
CHAMPLAIN Model 8302
9
and other components aside until called for during
the installation.
Dismounting from Pallet
With the accessory boxes removed and set aside,
remove the four lag screws that fasten the unit to
the pallet. Take care not to mar or chip the stove’s
finish.
Have someone help lift the stove off the pallet,
taking care to avoid damaging components
mounted under the stove.
INSTALLER:
Leave this manual with the appliance.
INSTALLATEUR :
Laissez cette notice avec
l’appareil.
CONSUMER:
Retain this manual for future
reference.
CONSOMMATEUR :
Conservez cette notice
pour consultation ultérieure
Firebox Access
1. Remove top of the stove (lift off). Set carefully
aside on a soft surface.
Figure 2
–Top Removal
2. Release the front panel by lifting up and off of
the stove body. Set aside on a soft surface.
Figure 3
– Front Panel Removal
3. Remove glass by rotating retention clips up until
clear of the clip slot. Lean the glass away from
the firebox at the top and pick straight up off of
the stove.
Figure 4
– Glass Removal
4. Reinstall by reversing the previous steps.
Clearances to Combustibles
Note: Ensure clearances are in accordance with
local installation codes and the requirements of
the gas supplier. Dégagement conforme aux
codes d’installation locaux et aux exigences du
foumisseunde gaz.
Due to high surface temperatures, locate the
unit out of traffic areas and away from furniture
and draperies. Do not place clothing and other
flammable material on or near the heater. When
positioning the unit always maintain adequate
clearances around air openings into the
combustion chamber and allow for adequate
ventilation.
Minimum
clearances
to
combustibles must be maintained as shown in
Figures 5 - 8.
Summary of Contents for Champlain 8302
Page 45: ...44 07044 2 RATING LABEL...
