Hearthstone Quality Home Heating Products, Inc.
Stowe 3 Model 8323
27
set exactly as shown in order to obtain a pleasing
flame pattern and efficient combustion. Incorrect log
placement can cause carbon build-up; excess
thermal stress on the log set and stove parts,
reduced efficiency, and high levels of carbon
monoxide. If the log set does not fit into the firebox
exactly as outlined, contact your dealer for
assistance.
Installation of the Log Set
CAUTION: DO NOT PLACE EMBERS NEAR THE
PILOT.
(Refer to the figures in this section)
1. If not already opened, follow the instructions for
firebox access on page 9.
2. Remove the packaging material around the log
set assembly. Be careful not to damage the log
set when unpacking. Observe the 5 mounting
“posts”, A, B, C, D, and E.
3. Gently slide the Y-shaped Log (1) onto pins A
and C, as shown next.
4.
Gently slide the longer, “half” log (2) onto pin D.
Be sure to position the rear of the log in front of
the pilot assembly and against the left side of
the firebox as shown below.
5.
Gently slide the shortest of the “half” logs (3)
onto pin B as shown below.
6.
Gently slide the medium length of the “half” logs
(4) onto pin E as shown next.
7. Gently slide the split log (5) onto pins C and D
as shown below.
Summary of Contents for Champlain 8302
Page 45: ...44 07044 2 RATING LABEL...
