Hearthstone Quality Home Heating Products, Inc
EUROPA Series 8900
21
Final Firebox Assembly
1. Remove the front stove
panel as shown.
2. Using
a 7/16” socket or
wrench loosen and remove
the 3 hex retaining bolts at
the top of the glass frame.
3. While holding the glass
panel and glass frame along
the outer edges, tip the top
of the glass frame forward a
few inches.
4. Wrap your fingers around the frame and hold the glass and
frame together while you lift the frame up and out of the lower
glass retainer. Set the glass and frame assembly aside in a
safe place.
Placing the Burner Glass Media
The burner glass media poly-bag that you set aside when you
unpacked the stove contains the correct amount of glass
material to cover the burner. The entire contents of the bag
should be evenly distributed over the burner tray.
1. Locate the burner in the stove. Refer to the adjacent
illustration.
2. Carefully clip one corner of the poly-bag to form a pouring
spout. The opening should be large enough to allow the
glass media to flow but
not so large that you can’t control
the flow.
3. You will notice that the burner surface is designed with
turned-up edges that form a tray to hold the glass media.
4. Starting at one end, pour the glass media onto the burner
tray, keeping the pouring spout on the poly-bag toward the
center of the burner to avoid spillage of glass pieces over
the sides of the burner. See the adjacent illustrations.
