Hearthstone Quality Home Heating Products, Inc
EUROPA Series 8900
22
5. Once you have poured all of the glass burner media into the burner tray, carefully smooth the glass pieces
out so they have a uniform depth over the entire surface of the burner. When the burner glass media is
properly placed, it should look like the adjacent illustrations.
6. Note: If a few pieces of glass escape over the edges of the burner tray during installation, it is not a
problem. They will simply land in the area below the burner and will do no harm.
Relief Door Installation
1. The top relief door is shipped separated from the fireplace and must be installed on the top of the fire-box at
this point in the installation. Note: The relief door includes a gasket that covers the full bottom surface. Use
care in handling the relief door to avoid damage to the gasket material.
2. The first illustration below shows the relief openings and relief door retainers.
3. The relief door includes line-up tabs that correspond to slotted retainers on the firebox.
4. Tip the relief door enough to allow the rear line-up tab to engage the rear retainer slot. Refer to the second
illustration below.
5. Rotate the front edge of each relief door so they line-up over front retainers.
6. Gently spring the front forward so it will allow the relief door front line-up tab to engage on the retainer.
7. The relief door should be able to move up and down freely on the retainers if properly installed.
8. When the relief door installation is complete, the door should be in the full down position.
9. Draft relief openings must not be covered or blocked.
Installing or Replacing the Batteries
