Hearthstone Quality Home Heating Products, Inc.
Bari Model #8180
15
provided). Install the exterior portion of the
thimble in similar fashion, overlapping the 2
sections.
CAUTION:
FOR BUILDINGS WITH VINYL SIDING,
INSTALL A VINYL SIDING STANDOFF BETWEEN
THE VENT CAP AND THE EXTERIOR WALL.
6. Install the horizontal vent termination on the
outside of the wall. Ensure both of the retaining
straps extend through interior wall thimble.
Before attaching the vent termination to the
outside of the house, run a bead of non-
hardening mastic around its’ outside edges to
ensure a good seal between it and the wall.
Ensure the arrow on the end cap points up
.
Secure the cap to the wall with appropriate
screws.
7. Move the stove and vent pipe into position.
Make sure the 12” vent pipe extends into the
horizontal vent cap a minimum of 1-1/4”. Secure
the vent using the straps from the horizontal
vent termination to the interior 6” pipe with 2
sheet metal screws, keeping the screws as
close to the wall thimble as possible. Bend or cut
any excess strapping, so that it is not visible
after the installation is complete.
