32
Q
UICK
R
EFERENCE
–
F
IREBOX
A
CCESS
D
OOR
&
G
LASS
F
RAME
R
EMOVAL
P
ROCEDURE
:
To access the firebox, remove the front door (recommended).
The door is attached to the stove with two machine screws
(see figure 16)
one on the top above the door, and one
below the lower left corner of the door. To access these screws you must open the front door. Remove the top and
bottom mounting screws using a 4mm or 5/32” Allen wrench (provided).
Figure 16: Top hinge bolt for front door
1.
Once the door is removed, place it carefully aside; you now have access to the glass frame.
2.
Remove the 12 mounting screws
(see figure 17)
that attach the frame and glass to the firebox.(Be careful
as you remove the last screws, as the frame will be loose and will want to fall)
3.
Once the frame is loose, set it on a soft material until it is ready to be replaced.
4.
Reverse steps 1 and 2 when remounting the door and glass frame.
Figure 17: Glass frame mounting screws
Mounting screws
You do not
need to
completely
remove the 4
screws on the
hinge side of
the frame.
Simply loosen
them enough to
slide the frame
in and out.
