HearthStone Quality Home Heating Products Inc
STOWE Gas-Fired Direct Vent heater
28
3" MIN.
Cap
Nipple
To Equipment
Inlet
Tee Fitting
Gas Supply
Inlet
Sediment Trap
F
IGURE
10 L
OG
S
ET
A
SSEMBLY
.
R
EMOVAL OF THE
L
OG
S
ET
To remove the log set, follow the
Installation of Log Set instructions in the
reverse order.
L
IGHTING THE
U
NIT FOR
THE
F
IRST
T
IME
¦
WARNING:
If you do not follow
these instructions exactly, a fire or
explosion may result causing property
damage, personal injury or loss of life.
¦
CAUTION:
Lighting the Stowe for
the first time and adjustments to the unit
should be performed by qualified service
personnel.
S
MOKE AND
F
UMES
W
ARNING
When lit for the first time, the Stowe will
emit some smoke and fumes. This is normal
“off-gassing” of the paints and oils used in
the manufacturing and assembly of the unit.
Open windows to vent the room if
necessary. The off gassing and fumes will
subside after the first 10 to 20 minutes of
operation.
O
DORS AND
I
MPURITIES
A heater of this type may produce odors
during heater operation due to impurities
that may exist in the immediate area.
Sources of impurities can be cleaning
solvents, paint solvents, cigarettes, smoke,
pet hair, dust, adhesives, new carpet, and/or
textiles. Such odors will dissipate. However,
opening a window or otherwise providing
additional ventilation to the area can
alleviate the condition. If any odor persists,
contact your dealer or an authorized service
technician.
P
ILOT
L
IGHT
W
ARNING
The Stowe has a piezoelectric spark igniter
(the push button located next to the gas
control valve behind the valve access door,
which ignites the pilot light by means of a
spark at the pilot light assembly. Do not
attempt to light the unit with a match or by
any means than the piezoelectric spark.
