Hearthstone Quality Home Heating Products, Inc.
STOWE Model 8324
20
Figure 20
– Log 2 Position
4. Place log 3 onto the end of log 1 as shown as
shown in Figure 21.
Figure 21
– Log 3 Position
5. Place log 4 on top of logs 1 and 2 as shown in
Figure 22.
Figure 22
– Log 4 Position
6.
Gently place Log 5 in the indentation on the
burner and rest it on log 3 as shown in Figure 23.
Figure 23
– Log 5 Position
7. Place small tufts of the Platinum Bright Embers
on the burner and log surfaces for additional
glow as desired
–
do not block burner ports
.
Figure 24
– Platinum Bright Embers
(Enlarged to
Show Detail)
R
EMOVAL OF
L
OG
S
ET
CAUTION: THE LOG SET, BURNER, AND EMBERS
RETAIN HEAT AND CAN BE VERY HOT! ALLOW
2 TO 3 HOURS TO COOL AFTER PILOT LIGHT IS
TURNED OFF FOR SAFE HANDLING.
To remove the log set, follow the Installation of Log
Set instructions in reverse order.
Completing the Installation
Once the firebox is closed and all cast iron panels
are re-installed, follow start up procedure outlined
below.
