Hearthstone Quality Home Heating Products, Inc.
Stowe DX Model 8322
15
Unpacking and Inspection
Hearthstone packages your Stowe to withstand
normal shipment without damage. However, damage
can still occur during transit. Take care to inspect for
damage when unpacking and installing the unit.
DO NOT INSTALL, OR PUT INTO SERVICE, A
DAMAGED OR INCOMPLETE HEATER.
Remove the shrink-wrap and other packaging
materials
taking care not to damage the stove’s
finish. Inspect the Stowe for visible or concealed
damage. The unit should be square and true. The
sheet metal parts should be smooth and free of
bends and dents. Any enameled cast iron should be
free of chips or cracks. If visible or concealed
damage is found or suspected, contact your dealer
for instructions.
Always use gloves and eye protection when handling
the decorative ceramic fire logs, burner, and Heat
Wave baffle. Use care when handling these parts as
they are fragile and subject to damage and breakage
if handled roughly.
See the firebox access instructions on page 16.
Unpack and inspect the logs for damage. Inspect the
ceramic burner. Open the other boxes and inspect
the components. If log, burner, baffle, or any other
component damage is encountered, contact your
dealer for a replacement. Otherwise, set the logs and
other components aside until called for during the
installation.
Dismounting from Pallet
With the accessory boxes removed and set aside,
remove the four lag screws that fasten the unit to the
pallet. Take care not to mar or chip the
stove’s finish.
Have someone help lift the stove off the pallet, taking
care to avoid damaging components mounted under
the stove.
INSTALLER:
Leave this manual with the appliance.
INSTALLATEUR :
Laissez cette notice avec
l’appareil
CONSUMER:
Retain
this
manual
for
future
reference.
CONSOMMATEUR :
Conservez cette notice
pour consultation ultérieure
f i r e - p a r t s . c o m
