Hearthstone Quality Home Heating Products, Inc.
Stowe DX Model 8322
30
Figure 29
– Baffle Mounting Bolt
5. Do not over tighten the bolt as it may damage or
break the baffle. When installed properly, the
gap across the top should be uniform and the
bottom edge of the baffle must rest on the shelf.
If the baffle lifts off the shelf, the mounting bolt is
too tight.
6. You are now ready to adjust the restrictor plate
and install the log set.
Installation of the Log Set
(Refer to the following images in this section for log
set assembly)
1. Remove the packaging material around the log
set assembly. Be careful not to damage the log
set when unpacking.
Figure 30
– Log Set Numbering
2. Place log 1 on support bracket as shown.
Figure 31
– Log 1 Mounting Detail
Figure 32
– Log 1 in Position
3. Place Log 2 into the channel in the burner in
front of log 1 as shown.
Figure 33
– Log 2 Position
1
2
3
4
5
f i r e - p a r t s . c o m
