Hearthstone Quality Home Heating Products, Inc.
Stowe DX Model 8322
31
4. Place log 3 onto the end of log 1 as shown.
Figure 34
– Log 3 Position
5. Place log 4 on top of logs 1 and 2 as shown.
Figure 35
– Log 4 Position
6. Gently place Log 5 in the indentation on the
burner and rest it on log 3 as shown.
Figure 36
– Log 5 Position
7. Place small tufts of the Platinum Bright Embers
on the burner and log surfaces for additional
glow as desired
–
do not block burner ports
.
Figure 37
–Platinum Bright Embers
(Enlarged to
Show Detail)
Removal of Log Set
CAUTION: THE LOG SET, BURNER, AND EMBERS
RETAIN HEAT AND CAN BE VERY HOT! ALLOW
2 TO 3 HOURS TO COOL AFTER PILOT LIGHT IS
TURNED OFF FOR SAFE HANDLING.
To remove the log set, follow the Installation of Log
Set instructions in reverse order.
Completing the Installation
1. Close the firebox
– reverse the firebox access
procedure outlined on page 16.
2. Install any batteries as necessary. Synchronize
the Remote Transmitter and Receiver (see page
37).
f i r e - p a r t s . c o m
