HearthStone Quality Home Heating Products Inc
Tudor Model #8120
21
R
EMOVAL OF
L
OG
S
ET
CAUTION: The Firelog set retains heat and
can be very hot! Allow 2 to 3 hours after
pilot light is turned off before handling.
To remove the Firelog set, follow the
Installation of Log Set instructions in the
reverse order.
L
IGHTING THE
U
NIT FOR
THE
F
IRST
T
IME
•
WARNING:
If you do not follow these
instructions exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
•
CAUTION:
Lighting the Tudor for the
first time and adjustments to the unit
should be performed by qualified service
personnel.
This appliance is only for use with the
type(s) of gas indicated on the rating plate.
This appliance is not convertible for use
with other gases, unless a certified kit is
used.
Cet appareil doit être atilisé uniquement
avec les types de gas indiqués sur la plaque
signalétique. Ne pas l’utiliser avec d’autres
gas sauf si un kited conversion certifié est
installé. )
S
MOKE AND
F
UMES
W
ARNING
When lit for the first time, the Tudor will
emit some smoke and fumes. This is normal
“off-gassing” of the paints and oils used in
the manufacturing and assembly of the unit.
Open windows to vent the room if
necessary. The off gassing and fumes will
subside after the first 10 to 20 minutes of
operation.
O
DORS AND
I
MPURITIES
A heater of this type may produce odors
during heater operation due to impurities
that may exist in the immediate area.
Sources of impurities can be cleaning
solvents, paint solvents, cigarettes, candles,
smoke, pet hair, dust, adhesives, new carpet,
and/or textiles. Such odors will dissipate.
However, opening a window or otherwise
providing additional ventilation to the area
can alleviate the condition. If any odor
persists, contact your dealer or an authorized
service technician.