Hearthstone Quality Home Heating Products, Inc.
WAITSFIELD Model 8770
35
•
Nighttime Setback
Temperature Mode
(Appliance must be
in standby mode; pilot
ignited)
The room temperature is
Measured and compared
to the Nighttime Setback
Temperature. The flame
height is then automatically adjusted to achieve the
Nighttime Setback Temperature.
•
Timer Mode
(Appliance Must be in
standby mode; pilot ignited)
The Timers P1 and P2
(Program 1, Program 2)
each can be programmed
to go ON and OFF at
specific times. For instructions
see Timer Programming Mode.
NOTE: The display shows the set temperature every
30 seconds.
SETTING
°C/24
HOUR OR
°F/12
HOUR CLOCK
•
Press
OFF
and small flame
button until display changes
from Fahrenheit/12 hour clock to
Celsius/24 hour clock and vice
versa.
SETTING THE TIME
•
The Time display will flash
after either:
a) Installing the battery or
b) Simultaneously pressing
the large flame and small
flame buttons.
•
Press large flame button to set
the hour.
•
Press small flame button to
set the minute.
•
Press OFF or simply wait to
return to manual mode.
SETTINGTHE ON/OFF TEMPERATURES
Setting the DAYTIME Temperature
DEFAULT SETTINGS: 23°C/74
o
F
•
Briefly press
SET
button to
scroll to TEMP mode (sun icon).
Hold the
SET
button until the
set temperature on the screen
flashes.
•
Press large flame button
to increase Daytime Set
Temperature.
•
Press small flame button
to decrease Daytime Set
Temperature.
•
Press OFF or simply wait
to complete programming.
