Hearthstone Quality Home Heating Products, Inc.
WAITSFIELD Model 8770
37
Setting P1 OFF Time
•
Select Timer Mode by briefly
pressing the
SET
button
until P1 and the crescent
moon appear.
•
Briefly press
SET
button to
scroll to setting P1 OFF time
(P1 and moon) is displayed
and the time flashes.
•
Set the hour by pressing
the large flame button.
•
Set the minutes by
pressing the small flame
button.
Setting P2 ON Time
•
Once P1 times are set, briefly press
SET
button
to scroll to setting P2 ON time.
P2 and the sun icon are displayed and the time
flashes.
•
See instructions SETTING P1 ON TIME.
Setting P2 OFF Time
•
Briefly press
SET
button to scroll to setting P2
OFF time. P2 and the crescent moon icon are
displayed and the time flashes.
•
See instructions SETTING P1 OFF TIME.
•
This concludes programming Timers P1 and P2.
Press OFF or wait. The handset will automatically
save your changes.
TO TURN OFF GAS TO APPLIANCE
1. Place ON/OFF switch in 0 (OFF position).
2. If gas control is accessible turn main valve knob
to the OFF full clockwise position.
3. Replace appliance access cover.
AUTOMATIC TURN DOWN
6 Hour no Motor Movement
•
Manual Model/Temperature/Timer Mode: The
valve will turn to pilot flame if there is no change
in flame height for a 6 hour period. In
Temperature/Timer Mode if the ambient room
temperature changes, the flame height will adjust
automatically to maintain set temperature, and
the fire will continue to function normally. The
valve will turn to pilot flame if the set temperature
and the ambient room temperature remain the
same over a 6 hour period.
Receiver Overheating
•
Valve turns to pilot flame if the temperature in the
receiver is higher than 140
o
F (60°C). The main
burner comes back on only when the temperature
is below 140°F (60°C).
AUTOMATIC SHUT OFF
Low Battery Receiver
•
With low battery power in the receiver the system
shuts off the fire completely. This will not happen
if the power supply is interrupted.
Five Day Shut Off
•
The system shuts off the fire completely if there is
no change in flame height for 5 days.
NOTE: Before the next ignition there is a 2 minute
waiting period.
Routine Maintenance and Care
Your Waitsfield requires minimal routine
maintenance and care. Ensure the unit is cool
and off when cleaning, or servicing.
WARNING:
DO NOT SUBSTITUTE MATERIALS.
For replacement parts, or for information about parts
or service, contact your local Hearthstone dealer.
