49
10' x 14' ROOF PANELS
PARTS REQUIRED:
48 x 96"
(121,9 x 243,8 cm)
x1
x4
2" (5,1 cm)
3/4" GAUGE
BLOCK
Roof panels may cause serious injury until securely fastened.
Note: Install all roof panels with the rough side up (painted grid lines).
Move to the opposite end.
Using the long edge of the panel
as a lever, move the panel side-
to-side until the top corner is
flush to the peak
(Fig. B)
.
Move gable end rafter edge until
it is 1/2" from the
48" x 47-7/8"
roof panel
(Fig. C)
.
Secure panel with (1) 2" nail in
each corner.
2
Place the
48" x 96"
panel on rafters with a
3/4" measurement on the rafter
(Fig A)
and the panel flush at the peak
(Fig. B)
.
Secure panel with (1) 2" nail in each corner.
48"
x 9
6"
Flush at
peak
Fig. B
BEGIN
1
3/4"
(1,9 cm)
Gauge Block
Fig. A
Flush at
peak
Fig. B
Two
Nails
Move Gab
le
1/2"
(1,2 cm)
Gable
End Rafter
Fig. C
Two
Nails
