38
VII. Advanced Mode
In addition to
emWave’s
Basic Mode
emWave
also offers you additional
functionality in the Advanced Mode. Advanced Mode adds two more
displays, HRV display and Stealth Display. In Advanced Mode the goal
remains the same—achieve and sustain High Coherence to reduce your
stress.
How to Enter the Advanced Mode
To enter Advanced Mode, turn
emWave
on (page 12). Next, press and
hold the top of the Sensor Button for ten seconds. Your entrance into
Advanced Mode is confirmed by five distinctly fast beeps (low, low, low,
low, high). Now connect to
emWave
using the Ear Sensor or Sensor
Button and wait for pulse calibration to start an active session. After
pulse calibration
you will see the HRV Display. (It is recommended that
you attach your Ear Sensor before turning on your emWave.)
Note:
You can also enter the Advanced Mode from an active session in Basic
Mode the same way, by pressing and holding the top of the Sensor Button
for ten seconds. Entrance into Advanced Mode from an active session will be
indicated by the five fast beeps.
emwave owners manual v1.2.1 .indd 38
11/7/07 12:40:29 PM