11
(Fig 18 ) (Fig 19)
6.Installing Controller and Connect Cables
Assemble the controller (#8) on right armrest bracket with 2 screws.(See Fig 20).
There are 1 main plug and 3 extended plugs for P16RTL. Please plug in the main
frame (#1) plugs and connect the other 2 (or 3) plugs color by color (See Fig 22),.You
have to plug in the main frame for other cables (connect for color by color) and make
sure tightly. (See Fig 21)
(Fig 20) (Fig 21)
7.Installing the Lights
The lights already pre-assembly in the saddle set by connecting the wire cables.
Please take the L-Shape brackets and use Allen key (No #6) and Wrench(#13) to
assemble.(See Fig 23)
Note
: There are 2 bolts in each side (Left and Right) of the front lights
and there 1 bolt in each side (Left and Right ) of the rear lights.
Controller
4 pins plug