9
2-2 Install the Armrest
Lift up the armrest bottom tube, take off the E- plastic clip and slide the armrest up
tube into the bottom tube (See Fig 11). Then insert the E-plastic clip into the correct
location. (See Fig 12)
(Fig 11) (Fig 12)
Note: 1. When you assemble the skirt guard’ bracket on the seat frame, the suggestive
hole position is the 6
th
. The skirt guard will hit the armrest bottom tube if you
assemble on the backward hole location.(Fig 13)
2. The right skirt guards is lower than the left one, because the controller
swingway bracket will lead the right skirt guard lower.
(Fig 13) Pin location (Fig 14)
U Bracket
3.Installing the Backrest
Put the backrest (#2) into the saddle set. Make sure the round tube fit into the U
bracket and the pin locate in correct position (See Fig 14).
I
nsert the spring pin into the hole (in U bracket) and let the spring to attach the other
end. (See Fig 15,16)
E-plastic
clip
The 6
th
hole.
