www.heartway.com.tw
15
OPERATION
The power wheelchair is simple to operate. However, we recommend that you read carefully
the following instructions to become familiarized with your new vehicle.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you to select
your desired speed. For indoor environments we recommend that you select the slowest speed
setting. For outdoor operation of this vehicle we recommend that you select a speed that is
comfortable for you to control it safely. The following steps are required to operate your vehicle
safely with the P18RTL controller (See Fig 24)
(Fig 23)
1.
On/off Button
The on/off button applies power to the control system electronics, which in turn supply
power to the wheelchair’s motors. Do not use the on/off button to stop the wheelchair
unless there is an emergency. (If you do, you may shorten the life of the wheelchair drive
components).
2. Horn Button
The Horn will sound while this button is depressed.
3. Speed Decrease Button
This button decreases the maximum speed setting. Depending on the way the control
system has been programmed a momentary screen may be displayed when the button is
pressed.
Horn button
Headlight
Button/ LED
On/off button
Hazard button
Left indicator
Button & LED
Right indicator
Button & LED
Speed Button
Decrease
Speed Button
Increase
Joystick
Battery
Condition LED
Tilt Button